TITEBOND UA 920 SEALANT

Titebond® UA 920 Sealant is a high performance, urethane acrylic formula which eliminates shiners, reduces dirt pickup and has great UV resistance. It requires no priming or mixing and provides an airtight, water-resistant seal. It remains permanently flexible and spans gaps up to 2” wide.

Features & Benefits

IDEAL FOR: Sealing around siding, windows and doors. Interior/exterior sealant for nearly any project.
SEALS: Siding, windows, doors, concrete, metal, wood and most common building materials.
High Performance for Siding, Windows & Doors
Meets AAMA 808.3
800% Elongation
Adhesive or Sealant Use
Paintable with water-based (latex-based) paints
VOC-compliant
Mildew resistant
UV resistant
Suitable for all climates
No priming or mixing required
50% total joint movement

SPECIFICATIONS

Complies with the following requirements:

ASTM C920, CLASS 25
ASTM C834 TYPE OP FOR WHITE AND COLORS (TYPE C FOR CLEAR) GRADE -18°C
FEDERAL SPECIFICATION TT-S-00230C TYPE II CLASS A

Meets:

AAMA 808.3

Application Guidelines

Application Temperature: Above 40°F (4°C)
Service Temperature Range: -40°F to 180°F (-40°C to 82°C)
Method of Application: Cartridge/caulking gun
Working Time: Approximately 15 minutes for a 1/4" bead
Application Directions: 1. Surfaces must be clean and free of any material that may prevent adequate adhesion. Properly designed joint depth is half as thick as width but not to exceed ½ inch thickness (on joints over 1 inch wide). 2. Cut tip at 45° angle to desired bead width and place in cartridge gun. 3. Force sealant into clean joint. If necessary, smooth bead immediately. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability. NOTE: If using as an adhesive, bracing may be required until the product dries. Mechanical fasteners should be used for heavy loads.
Cleanup: Clean uncured material with water. After curing, excess sealant must be cut or scraped away.
Coverage:

Container 1/8” Bead 1/4" Bead 3/8" Bead 1/2" Bead

10.1 oz. Cartridge 123 ft. 31 ft. 14 ft. 8 ft.

Container	1/8” Bead	1/4" Bead	3/8" Bead	1/2" Bead
10.1 oz. Cartridge	123 ft.	31 ft.	14 ft.	8 ft.

ASTM C794

	Dry Peel Adhesion	Wet Peel Adhesion
Aluminum	32-42 FD/C	20-28 C
Glass	39-45 FD/C	25-28 C
Cement	(8) SF	14-24 C

Physical Properties

Type: Urethane acrylic
Calculated VOC: <50 g/L (<1.5%)
Color: White, clear and medium bronze
Solids: 69% white & colors,
61% clear
Flashpoint: Solvent free/Not applicable
Freeze / Thaw Stability: Stable
Viscosity: 550,000 cps
Storage Life: 24 months in a dry location at or below 75°F

Limitations

Not designed for continuous submersion or use below the waterline. Air, sealant and surface temperature should be above 40°F. Do not apply if rain is expected within 12 hours. Cure time is dependent upon ambient conditions including temperature and humidity. The sealant should be dry to the touch and ready to paint in 2-4 hours. Do not use for aquariums. It is highly recommended to use backing material. For best results, store in a dry location at or below 75°F. NOTE: Titebond UA 920 Clear (8741) will be white during application but will clear within 7-14 days, depending on temperature, humidity and bead size.

Product SKUs

Part Number	UPC	Case UPC	Size	Weight	Units Per Package	Packages Per Pallet
8701	037083087017	10037083087014	10.1 Oz. Cartridge - White	11.00	12	108
8731	037083087314	10037083087311	10.1 Oz. Cartridge - Bronze	11.00	12	108
8741	037083087413	10037083087410	10.1 Oz. Cartridge - Clear	11.00	12	108
8761	037083087611	10037083087618	10.1 Oz. Cartridge - Medium Bronze	11.00	12	108

Warranty Statement

50 Year Limited Warranty: If not satisfied with product performance when used as directed, return container and proof of purchase to Franklin International, Inc. for replacement of product. Liability is limited to product replacement only.