INSTANT BOND WOOD ADHESIVE MEDIUM

Titebond Instant Bond is a two-part bonding system that takes between 5 - 15 seconds to set and 30 - 60 seconds for initial cure. It provides a strong, permanent bond and is ideal for hard to reach joints or surface areas that are difficult to clamp. Designed primarily for wood and wood products, this adhesive is also very effective on a wide variety of materials and substrates. Titebond Instant Bond Medium viscosity product offers an assembly time of 7 seconds and an initial cure speed of 5 seconds. In addition to typical bonding applications, it is ideal for filling knots and voids in wood, adhering pen tubes to blanks for pen turning applications, and for soaking end-grain to prevent splitting.

Features & Benefits

  • Fast set - Eliminates clamping or reduces clamp time
  • Bonds stronger than wood
  • Excellent heat and solvent-resistance
  • Unaffected by finishes
  • Versatile - Bonds wood, MDF, acrylic, granite, natural rubber, PVC and more
  • 2 year shelf life
  • Triple distilled for purity & consistency
  • Impact-resistant
  • No-clog applicator for easy use and waste reduction
  • Adhesion of pen tubes to blanks in pen making
  • MIL Spec (A46050C) Type II, Class 2

Application Guidelines

  • Application Temperature: Above 50°F (10°C)
  • Cure Speed: 7 second handling, 5 second set, 30 second cure. *Full cure in 8 hours.
  • Service Temperature Range: -65°F to 200°F
  • Cleanup: Use acetone. Follow solvent vendor’s precautions.

BOND STRENGTH ASTM D-1002

Temperature Shear Strength psi
Room Temperature Between 2800 and 4200 psi depending on substrate tested

Physical Properties

  • Type: Ethyl cyanoacrylate
  • Reactive VOC: 20 g/L
  • State: Liquid
  • Weight Per Gallon: 9.18 lbs.
  • Color: Clear
  • Flashpoint: > 178°F
  • Dried Film: Translucent
  • Freeze / Thaw Stability: Stable
  • Solids: 100%
  • Specific Gravity: 1.1
  • Viscosity: 120 cps
  • Storage Life: 2 yrs in tightly closed bottles stored between 40° & 75°F

Limitations

Instant Bond Wood Adhesive Medium Adhesive is not intended for exterior use or where moisture is likely. Store in a cool, dry place. Handling and set times may be affected by environmental conditions. For best results, apply adhesive between 55°F and 85°F. KEEP FROM FREEZING.

Product SKUs

Part NumberUPCCase UPCSizeWeightUnits Per PackagePackages Per Pallet
6211037083062113100370830621102 Oz. Bottle2.6015210
6212037083062120100370830621274 Oz. Bottle3.6110270

Caution Statement

DANGER: COMBUSTIBLE LIQUID. Bonds skin, eye and other tissue instantly. Contains ethyl-2-cyanoacrylate. Irritating to eyes, skin and respiratory tract. Do not allow eye or skin contact. Avoid breathing vapors. Do not swallow. Keep away from sources of heat. FIRST AID: For eye contact, do not force eyes open. Flush eyes with water for 15 minutes and seek medical attention immediately. For skin contact, flush contact area with water and seek medical attention. If inhaled, remove to fresh air. Seek medical assistance if symptoms persist. Refer to Safety Data Sheet for additional information. Not for use on products in contact with food items. Please use Titebond III Premium Wood Glue or Titebond II Ultimate Wood Glue for items used for indirect food contact. KEEP OUT OF THE REACH OF CHILDREN.