TITEBOND FAST SET POLYURETHANE CONSTRUCTION ADHESIVE


Titebond Fast Set Polyurethane Construction Adhesive is a one-component, advanced adhesive technology designed to build strength faster and stronger than other common construction adhesives. It bonds to most building materials and provides a smooth bead for effortless extrusion - even in near-freezing temperatures. It is covered und...

more

Watch Video

Features & Benefits

check_circle
Recommended For: Demanding interior/exterior construction, installation and repair projects.
check_circle
Compatible Materials: Common building materials including wet, frozen and treated lumber, stone, concrete, metal, landscaping blocks, brick, masonry, drywall, plastic, foam and mirrors
check_circle
Builds strength faster than common construction adhesives
check_circle
Class 1/8 in., Type P/O subfloor adhesive in accordance with ASTM D3498-19
check_circle
Ultimate strength and durability
check_circle
No drool and less mess
check_circle
Cold weather extrusion
check_circle
Bonds virtually any material
check_circle
Smooth, full bodied bead
check_circle
Waterproof
check_circle
All weather
check_circle
Will not become brittle, crack or lose strength

Application Guidelines

Application Temperature:
32°F to 120°F
Service Temperature Range:
-20°F to 250°F
Prep:
Surfaces must be clean and free of any material that may prevent adequate adhesion.
Application:
Cut tip on slant for 1/4’’ to 3/8’’ bead. For subfloors, bead size is determined by subfloor material and width of joist. Cut tip straight across to produce between a 3/8” to 1/2” bead, to ensure full width of coverage (squeeze out) on joist. Puncture inner seal and place in cartridge gun. Apply adhesive to one of the surfaces in either a continuous or spot bead. Adhere materials within 10-20 minutes based on environmental conditions. Press surfaces firmly together with a slight twisting motion. Certain large applications may require additional bracing until adhesive has cured. Note: For subfloors, apply adhesive to joists for one sheet at a time. Apply enough adhesive to joists to allow for full coverage and sufficient squeeze out when panels are placed. Nail or screw each sheet as recommended by the American Plywood Association.
Cleanup:
Tools and adhesive may be cleaned with mineral spirits before adhesive dries. Follow solvent vendor's precautions. If dried, removal will require scraping or other mechanical means.
Limitations:
Not intended for continuous submersion. Adhesive can be difficult to remove from skin and clothing. It is recommended that gloves be worn. This moisture cured adhesive may exhibit a reduction in working time when exposed to high heat and humidity. When using on non-porous substrates, mist with water to speed curing.

Physical Properties

Type
One-component, moisture-cured polyurethane
State
Medium-viscosity mastic
Color
Brown
Open Time
Approximately 10-20 minutes, depending on environmental conditions
Solids
98%
Viscosity
150,000 cps.
Calculated VOC
< 50 g/L
Flashpoint
> 200°F
Freeze / Thaw Stability
Will not freeze
Storage Life
18 months from date of manufacture
Odor
Low

Coverage

Size 1/8” Bead 1/4" Bead 3/8" Bead 1/2" Bead
10 Oz. Cartridge 129 ft. 30 ft. 14 ft. 8 ft.
28 Oz. Cartridge 355 ft. 86 ft. 39 ft. 21 ft.



Specifications & Certifications

  • Exceeds Class 1/8 in., Type P/O subfloor adhesive in accordance with ASTM D3498-19, APA AFG-01, ASTM C557, CAN/CGSB-71.25M and CAN/CGSB-71.26M. Certified for use with FHA/HUD UMB #60.

Warranty Statement

Learn about all the products included in the industry's Best Subfloor Adhesive Warranty.